All major operations, such as engineering, roughing, grinding, drilling, milling, EDM cutting, tempering, assembly and testing are carried out within Gima S.p.A. facility. Only in some exceptional cases we rely on third parts for special tools or tempering.

The carrier plates are made of C45 steel. Dies, punches and other work surfaces are made of 1.2080 steel: a high alloy steel, suitable for tempering and with a high wear resistance.

Please contact us by phone or via the contact form and provide a drawing of the part. For a quicker response, you can also attach the 3D model. Kindly, report if Gima S.p.A. will produce the parts or if the die will be used by third parts. Moreover, we strongly suggest to report the dimensional and geometrical tolerances and, if necessary, other auxiliary operations like galvanizing, tumbling etc.

Yes, we can provide only the die to the customer, which will rely on an external supplier for parts production. On request, we can still offer maintenance during its usage.

Yes, it is possible to verify functionality and to execute the necessary sharpening operations. In some cases, we could need the drawing of the part or of the die.

Stamping operations allow obtaining parts at a very low price, at the expense of an initial investment. So it is suggested to rely on stamping when the production quantities allow a short return of investment (ROI).

It depends on a high number of variables like the type of the material and the thickness of the sheet, the complexity of the part, the stroke and the speed of the stamping press, the speed of any automation system etc. For flat parts obtained with a simple shearing, it is possible to reach 120 parts/minute. For more complex parts, that features bending or coining, the production capability is usually between 20 and 60 parts/minute.

Gima S.p.A. is able to assist the customer in the selection of the most proper production process and in the designing of parts obtained by cold forming. Thanks to FEM analysis it is also possible to verify the mechanical resistance of the parts right before the engineering of the stamping die.

Yes it is, in some cases we made stamping dies for cutting of plastic sheets.

Yes it is, we can build control and motion systems for executing particular or sequenced operations. Case by case, Gima S.p.A. is able to realize mechanic, electric, pneumatic or hydraulics devices.